| Single Site Passive Series |
|
|
|
|
The Single Site Passive Series is a passive heat sink subassembly that is modified to integrate with nearly any open top socket. The clamshell style design allows you to use your socket of choice, in conjunction with a passive heat sink solution from the premier thermal solutions provider in the back end test and burn-in marketplace. The subassembly is hardware mounted to the BIB, after socket assembly.
The Single Site Passive Series features include:
- Clamshell action and use
- Unique design results in true vertical approach to device-eliminates point loading on device during lid actuation and closure
- Low cost achieved through molded and extruded components
- Maximum ambient temperature 125°C
- Spring loaded, compliant, heat sink allows for even mating to DUT
- Heat sink to DUT force calculated for optimal thermal resistance*
- Thermal interface material supplied upon customer request
- Designed to meet your chamber slot to slot chamber spacing
* The thermal resistance of heat sinks are based upon a handful of variables.
These variables include:
- The area that is in intimate contact between the heat sink and DUT
- The force applied to the DUT by the heat sink
- The airflow of the ambient environment
| Series/PN |
Acronym |
Max Socket Size |
Max Socket Height |
|
| TMA-10-X-XXXX |
SFF SSxS |
30mm x 30mm |
12.7mm |
|
| TMA-11-X-XXXX |
MFF SSxs |
TBD |
TBD |
|
| TMA-12-X-XXXX |
LFF SSxs |
62mm x 62mm |
25.4mm |
|
| TMA-13-X-XXXX |
XLFF SSxS |
76mm x 76mm |
25.4mm |
|
| TMA-15-X-XXX |
XLFF SO SSxS |
76mm x 76mm |
25.4mm |
|
The lid hinge is spring loaded, allowing for typical clamshell
rotational motion at the top of the actuation cycle. Final
motion to closure is directly vertical allowing for a planar
approach of pressure pad to DUT.
